Auto care
KENOTEK - CARGO 4100 (23KG) Contactless snow foam
UNIQUE TOUCHLESS CLEANING PRODUCT
- Extra strong and concentrated
- Good foam coverage for better contact with the vehicle
- Cleans oil, grease, insects and static road film
- 3 in 1: bodywork degreaser, alkaline wheel cleaner and insect remover
Product Description
Cargo 4100 Forté is an extra strong, concentrated exterior cleaner for all vehicles. It has a strong degreasing power and ensures an efficient cleaning of stubborn traffic film. The specific foaming guarantees a good coverage of the entire vehicle and a better soaking power of the dirt. Cargo 4100 Forté is a unique product suitable for touch-less applications.
Available packages: 23 KG 240 KG 1200 KG.
Technical Information
Cargo 4100 Forté can be applied via a sprayer, high pressure installation and foaming gun.
Dosage
- Normal vehicle cleaning: 0.5 - 2%
- Insect removal: 3 - 5%
- Wheel cleaning: 10 - 15%
KENOTEK - CARGO 4100 (5LT) Contactless snow foam
Concentrate - Makes 25lt of snow foam!
UNIQUE TOUCHLESS CLEANING PRODUCT
- Extra strong and concentrated
- Good foam coverage for better contact with the vehicle
- Cleans oil, grease, insects and static road film
- 3 in 1: bodywork degreaser, alkaline wheel cleaner and insect remover
Product Description
Cargo 4100 Forté is an extra strong, concentrated exterior cleaner for all vehicles. It has a strong degreasing power and ensures an efficient cleaning of stubborn traffic film. The specific foaming guarantees a good coverage of the entire vehicle and a better soaking power of the dirt. Cargo 4100 Forté is a unique product suitable for touch-less applications.
Available packages: 23 KG 240 KG 1200 KG.
Technical Information
Cargo 4100 Forté can be applied via a sprayer, high pressure installation and foaming gun.
Dosage
- Normal vehicle cleaning: 0.5 - 2%
- Insect removal: 3 - 5%
- Wheel cleaning: 10 - 15%
Suttner - ST73.1 Foam Lance + 2 Litre Bottle (Blue - 1.8mm)
FULL PRODUCT DESCRIPTION:
Suttner - ST73.1 Foam Lance + 2 Litre Bottle (Blue - 1.8mm)
Check the pressure and flow rate of your washer before purchaseing a foam lance as there are different sizes, see chart above.(We have also outlined a rough guideline below.)
- Black 1.25mm Nozzle (Small 230v Washers / Small petrol Washers)
- Red 1.5mm Nozzle (Large single phase washers / Medium size petrol washers)
- Blue 1.8mm Nozzle (3 Phase washers / Large petrol or diesel washers)
The Suttner ST-73.1 foam lance with the 2L bottle is fitted with an interchangable injecting nozzle and a foaming pad. By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. The injector unit is made from stainless steel and has 5 defined dosing positions. These 5 different positions dispense 5 different levels of product concentration through your foam lance.
If using Kenotek Contrated products See below:
Setting number I = 2%-2.5 % , II = 4% -4.5%, III = 5% - 5.5 %, IIII = 6.5% -7%, IIIII = 7.5% - 8%
Using Kenotek 4,100, Washing a vehicle
weekly use setting : I
Washing 2 - 3 weeks use setting: II
Every month and very heavy dirt: setting : III
Specfications:
- Inlet: 1/4" Female
- Nozzle: 1.8mm
- Max: 300 Bar
- Max: 80°C
- 2 Litre Bottle
- Weight: 0.4800 kg
Suttner - ST73.1 Foam Lance + 2 Litre Bottle (Red - 1.5mm)
FULL PRODUCT DESCRIPTION:
Suttner - ST73.1 Foam Lance + 2 Litre Bottle (Red - 1.5mm)
Check the pressure and flow rate of your washer before purchaseing a foam lance as there are different sizes, see chart above.(We have also outlined a rough guideline below.)
- Black 1.25mm Nozzle (Small 230v Washers / Small petrol Washers)
- Red 1.5mm Nozzle (Large single phase washers / Medium size petrol washers)
- Blue 1.8mm Nozzle (3 Phase washers / Large petrol or diesel washers)
The Suttner ST-73.1 foam lance with the 2L bottle is fitted with an interchangable injecting nozzle and a foaming pad. By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. The injector unit is made from stainless steel and has 5 defined dosing positions. These 5 different positions dispense 5 different levels of product concentration through your foam lance.
If using Kenotek Contrated products See below:
Setting number I = 2%-2.5 % , II = 4% -4.5%, III = 5% - 5.5 %, IIII = 6.5% -7%, IIIII = 7.5% - 8%
Using Kenotek 4,100, Washing a vehicle
weekly use setting : I
Washing 2 - 3 weeks use setting: II
Every month and very heavy dirt: setting : III
Specfications:
- Inlet: 1/4" Female
- Nozzle: 1.5mm
- Max: 300 Bar
- Max: 80°C
- 2 Litre Bottle
- Weight: 0.4800 kg
Suttner - ST73.1 Foam Lance + 2 Litre Bottle (Black - 1.25mm)
FULL PRODUCT DESCRIPTION:
Suttner - ST73.1 Foam Lance + 2 Litre Bottle (Black - 1.25mm)
Check the pressure and flow rate of your washer before purchaseing a foam lance as there are different sizes, see chart above.(We have also outlined a rough guideline below.)
- Black 1.25mm Nozzle (Small 230v Washers / Small petrol Washers)
- Red 1.5mm Nozzle (Large single phase washers / Medium size petrol washers)
- Blue 1.8mm Nozzle (3 Phase washers / Large petrol or diesel washers)
The Suttner ST-73.1 foam lance with the 2L bottle is fitted with an interchangable injecting nozzle and a foaming pad. By turning an adjustable grip handle the concentration of foaming agent in the water can be adjusted. The injector unit is made from stainless steel and has 5 defined dosing positions. These 5 different positions dispense 5 different levels of product concentration through your foam lance.
If using Kenotek Contrated products See below:
Setting number I = 2%-2.5 % , II = 4% -4.5%, III = 5% - 5.5 %, IIII = 6.5% -7%, IIIII = 7.5% - 8%
Using Kenotek 4,100, Washing a vehicle
weekly use setting : I
Washing 2 - 3 weeks use setting: II
Every month and very heavy dirt: setting : III
Specfications:
- Inlet: 1/4" Female
- Nozzle: 1.25mm
- Max: 300 Bar
- Max: 80°C
- 2 Litre Bottle
- Weight: 0.4800 kg
Kew Style Spigot 1/4" Female
FULL PRODUCT DESCRIPTION:
Male kew style spigot to suit quick release couplings. Fits to lance end. 1/4 female thread.
Specification:
- 1/4" Female
- Stainless steel
- 19mm Nut
- Full thread
- Weight: 0.0800 kg
Kew Style Spigot 1/4" male
FULL PRODUCT DESCRIPTION:
Male kew style spigot to suit quick release couplings. Fits to lance end. 1/4 male thread.
Specification:
- 1/4" Female
- Stainless steel
- Weight: 0.0800 kg
Quick Release Coupling - Kew style
Product Description:
Kew style quick release coupling - Attaches to the trigger outlet where you would remove the lance from the existing lance to convert into a quick release wash lance/foam gun.
Suttner - Trigger ST2600S Easy Pull QRC X 3/8"F Swivel
FULL PRODUCT DESCRIPTION:
Very high end, professional power wash trigger.
The Suttner ST2600 range of guns are based on the Stuttner ST2300 guns, but with the added advantage of being fitted with the LTF (Low Triger Force) trigger system. The LTF system has a 90% less holding force and a 40% less trigger pulling force, than the standard market wash guns.
Specifcations:
- Max Press:310 Bar
- Max Flow:45 Lpm
- Max Temp:150ºC
- Inlet:3/8" F Swivel
- Outlet:Qrc
- Opening Force: 31N @ 100 bar
- Holding Force: 10N @ 100 bar
- Weight: 0.7500 kg
PA Style Foam Lance + 2 Litre Bottle
PA Style Foam Bottle 1.5mm Nozzle 2 Litre Bottle
Recommended for medium size to large pressure washers.
- 200 Bar rated pressure
- 25 Lpm max flow
- 60°C rated temperature
- 1.5mm nozzle - 2 litre tank
- 1/4"BSPF inlet
- Brass injector body
Pezzaioli Parts
Lamps & Electrical
LED marker light amber (rounded ends)
Aspoeck Unipoint style light.
Amber light.
c/w 0.5mt cable.
Amber LED downlighter (Pezzaioli)
As mounted above deck locks on Pezzaioli trailers.
Lights amber.
C/W 0.5mt cable.
LED Marker Light Amber (Dogbone) BPW/ERMAX
LED Marker Light Amber (Dogbone) BPW/ERMAX
As fitted on Pezzaioli Trailers 2018>
Comes with 0.5mt cable.
Genuine BPW/ERMAX product.
LED Marker Light Red (Dogbone) BPW/ERMAX
LED Marker Light Red (Dogbone) BPW/ERMAX
As fitted on Pezzaioli Trailers 2018>
Comes with 0.5mt cable.
Genuine BPW/ERMAX product.
LED Marker Light Clear (Dogbone) BPW/ERMAX
LED Marker Light Clear (Dogbone) BPW/ERMAX
As fitted on Pezzaioli Trailers 2018>
Comes with 0.5mt cable.
Genuine BPW/ERMAX product.
Blower trailer parts
Blower Hose 7ft (Animal Feed)
7ft Blower Hose
- Rubber with anti abrasion lining
- Cuffed Ends
- Fitted with aluminium male & female 4'' Camlocks
- High quality Camlocks
- 4x clamps per hose
- Anti static
**In-store collection only or contact us for shipping quote.**
Van air suspension kits
Mercedes Sprinter W903 1996-2006 single wheel RWD
AIR SUSPENSION KIT
Mercedes Sprinter W903 (RWD)
1996-2006
- Year of vehicle manufacture: 1996 to 2006
- Drive: rear-wheel drive (RWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
Mercedes Sprinter W904 1996-2006 Double wheel
AIR SUSPENSION KIT
Mercedes Sprinter W904
Double Wheel
from 1996 - 2006
- Year of vehicle manufacture: 1996 - 2006
- Drive: rear-wheel drive (RWD)
- Rear wheels: double wheel (DW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
Fiat Ducato X244 1994-2006
AIR SUSPENSION KIT
Fiat Ducato X244
1994-2006
- Year of vehicle manufacture: 1994 to 2006
- Drive: front-wheel drive (FWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
Fiat Ducato X250-X295 2006 onwards
AIR SUSPENSION KIT
Fiat Ducato X250-X295
from 2006 onwards
- Year of vehicle manufacture: From 2006 onwards
- Drive: front-wheel drive (FWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
Renault Master II 1996-2010 FWD
AIR SUSPENSION KIT
Renault Master II (FWD)
1998-2010
- Year of vehicle manufacture: 1998 to 2010
- Drive: front-wheel drive (FWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
Renault Master III/IV - 2010> Single Wheel FWD
AIR SUSPENSION KIT
Renault Master III/IV (FWD)
from 2010 onwards
- Year of vehicle manufacture: from 2010 onwards
- Drive: front-wheel drive (FWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
Renault Master III/IV - 2010> Twin Wheel
AIR SUSPENSION KIT
Renault Master III/IV
Double wheel
from 2010 onwards
- Drive: rear-wheel drive (RWD)
- Rear wheels: double wheel (DW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
Renault Master III/IV - 2010> Single Wheel RWD
AIR SUSPENSION KIT
Renault Master III/IV (RWD)
from 2010 onwards
- Year of vehicle manufacture: from 2010 onwards
- Drive: rear-wheel drive (RWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side.
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
VW LT35 Single wheel
AIR SUSPENSION KIT
Volkswagen LT
1996-2006
- Year of vehicle manufacture: 1996 to 2006
- Drive: rear-wheel drive (RWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
VW LT46 twin wheel
AIR SUSPENSION KIT
Volkswagen LT
Double Wheel
1996-2006
- Year of vehicle manufacture: 1996 to 2006
- Drive: rear-wheel drive (RWD)
- Rear wheels: double wheel (DW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
VW Crafter 2006 - 2016 twin wheel
AIR SUSPENSION KIT
Volkswagen Crafter
Double Wheel
2006-2016
- Year of vehicle manufacture: 2006 to 2016
- Drive: rear-wheel drive (RWD)
- Rear wheels: double wheel (DW)
The basic kit includes:
- 2x air spring 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.
VW Crafter 2006 - 2016 single wheel
AIR SUSPENSION KIT
Volkswagen Crafter (RWD)
2006-2016
- Year of vehicle manufacture: 2006-2016
- Drive: rear-wheel drive (RWD)
- Rear wheels: single wheel (SW)
The basic kit includes:
- 2x air spring 170/1E or 170/2
- 2x top mounts
- 2x bottom mounts
- 1x control panel with one pressure gauge - central control*.
- 1x 10m pneumatic hose
- 1x T-piece**, set of screws
Additional equipment:
- 12V 100PSI compressor (1 piston) including non-return valve
- 12V 150 PSI compressor (2 pistons) including non-return valve
- Control panel with two pressure gauges - independent control of right and left side
* The control panel included without compressor is designed for external pumping. It does not have a button to start the compressor.
** When buying a kit with a compressor, a non-return valve is included instead of a tee.
Please note; Due to the large variety of makes & models, these kits are made to order. Please allow up to 14 days for delivery. Normal delivery is 7/8 days.
Having trouble selecting a control panel and compressor?
Give us a call. We will be happy to advise you.
We look forward to receiving your order by phone or e-mail.